Daily Archives: February 20, 2017

  • 0

Bull Block Wire Drawing Machine Hydraulic Wire Pulling Equipment CE Standard

Category : Uncategorized

Bull Block Wire Drawing Machine Hydraulic Wire Pulling Equipment CE Standard

1. Usage: drawing the wire from tyre

2. Tire specification: 1200-4000mm

3. Capacity: 20-50 tyres/hr


Draw out the steel wires from the tire bead.


Structural Features:


This machine consist of motor ,hydraulic system,drawing hook,drawingmouth,

and main part,etc.its basic principle is Drien hydraulic system and made the

cylinder work by the motor to make the drawing hook liked the cylinder spull

pople reciprocate motion.put the tire on the drawingmonth and jut the drawing

mouth to hook steel wire. meanwhile the rubber part of tire is teared because

of the drawing mouth blick it.thus get the effect of separating smoothly.


Instruction of tire wire drawing machine


the line is complete automatic line, from drawing out the steel circle from the tire bead,

crushing the whole tyre, separating the thin steel and fiber to the rubber powder,

The line is recycling the waste tyre under the normal temperature.


Feature of tire wire drawing machine


1. it is used to crush the waste tires into rubber powder
2. it is good for environmental protection and energy saving, Market Prospect Broadness .

3. it can get iron/steel removing ratio>99.5%, fiber removing ratio>98%.


Hydraulic waste tire recycling equipment Single Hook Tyre Debeader

Flow working chart of tire wire drawing machine


waste tire—wire drawing —whole tire cutter—rough crusher—rubber grinder—-

magnetic separating and fiber separator—pulverizer unit—rubber powder


Technical Parameters:


Model LS-1200

Single hook

Tire Diameter <1200mm
Pull 5T
Capacity 20-50 tires/hour
Motor Power 15Kw
Weight 1.5T
Dimension 4200*900*1700mm

  • 0

Industrial Lead 5000 * 3 pixel metal sorting machine Passed CE

Category : Uncategorized

Industrial Lead 5000 * 3 pixel metal sorting machine Passed CE

Detailed Product Description

Industrial Lead 5000 * 3 pixel metal sorting machine Passed CE

1. Using imported 5000*3 pixel true color CCD linear array camera, recognition accuracy up to 0.08mm, and take machine vision into production in this industry;

2.Using linear array image scanning technology , high-speed intelligent image acquisition system;

3. Using the most advanced U.S. technology for programming device, and the embedded software operation platform make system more stable, response faster and function more powerful;

4. The system is added to special algorithm, such as shape selection, and area algorithm,to solve problems like sorting some kinds of beans according to their shape , color , and area at the same time and expand the scope of application of color sorter , and make multi-function , multi species of color sorting come true;

5. Using the most advanced LED optics technique in the world, machine has longer life , better uniformity, more wide color areas, and lower power consumption, the power consumption is only 10-30% for general lighting ;

6.Using different slide according to different materials, no need to change light source, and it is suitable for a variety of industrial products, beans, nuts, grains and other particles and sheet material;

7.Using of V type , U type , flat slide , and special technology to ensure product stability and reliability;

8.Integrating more than 10 global exclusive patent technology.


Metal , Industrial, Metal Sorting, Grading

Competitive Advantage:

1.5000*3 pixel CCD camera and photo processing technology

2.Recognition accuracy up to 0.08m

3.Passed CE, UL, ETL, ISO9001

4.LED TFT real 8.4 inch screen

5.Self checking system


Model HJ-C4R
Machine weight (kg) 950
Dimensions(L×W×H)cm 180×142×143
Channels 84
Materials handling capacity (T/H) 5.5-6.5
Accuracy of color selection 99.5%
Best “out of ratio” >20:1
Host power 1.4
Air pressure 0.6Mpa
Air consumption (L/min) 700-2500
Power supply voltage 220V/50HZ

  • 0

Low Power Plastic Film Machine , Multilayer Blown Film Plant 100 – 1200mm Width

Category : Uncategorized

Low Power Plastic Film Machine , Multilayer Blown Film Plant 100 – 1200mm Width


1) The unit extruder, barrel, screw adopt high-quality steel, nitride tight handling and precision machining, with the best hardness and corrosion resistance, a specially designed screw high yield, good plastic.

2) The main motor adopts frequency control of motor speed to improve the speed regulating stability of main motor and save electricity by 30%.

3) The screw and material barrel adopt 38 chrome-molybdenum aluminum which has been nitrogen treated and the traction frame adopts lifting type.

4) No matter what size the film is, big or small, it can achieve the best effect of cooling.


Main Specification:

SCREW DIAMETER(mm) 50mm 55mm 60mm 65mm
SCREW L/D 28:1 28:1 28:1
Reduced diameter of film 100-600mm 200-800mm 300-1000mm 400-1200mm
Single-face thickness 0.01-0.10mm 0.01-0.10mm 0.01-0.10mm 0.01-0.10mm
Max.Extrusion 30-45kg/h 40-70kg/h 60-100kg/h 80-110kg/h
Power of main motor 7.5-11kw 11-15kw 18.5-22kw 22kw
Power of traction power 1.1kw 1.1kw 1.5kw 1.5kw
Heating Power 11kw 13kw 19kw 21kw
Outline diameter 4.8*1.9*3.5m 5.5*2.1*3.8m 6.5*2.3*4.2m 6.5*2.5*6.0m
Weight 1.5T 2T 2.3T 2.6T


Both the cylinder and the screw of the extruder are made of high quality alloy steel through nitration and precision finishing with the best hardness and corrosion resistance. Scientifically designed, this machine set has two heads for one extruder with such advantages as increasing production capacity, saving energy, labour and workshop area, etc…
This machine set is used for blowing Low-density polyethylene(LDPE)and high-density polyethylene (HDPE)plastic film to make various vest bags and flat-rim bags which have been widely used for packing in the food industry, garment industry and textile industry, etc…


Optional Device:


1. Auto load

2. Cast aluminum heater

3. Air shaft

4. Rotary die device

5. Double sides winder

6. Up and down

7. Pneumatic device

8. Air compressor