Daily Archives: October 31, 2016

  • 0

Mineral Ore Or Limestone Automatic Belt Conveyor System For Mining Industry

Category : Uncategorized

High Capacity And High Efficiency Mining Conveyor System For Transporting Limestone


Brief Introduction:


Mining conveyor system can transport various kinds of material economically and efficiently, and be


used as continuous production link between production equipment, in order to realize the continuity and


automation of production process, and improve the production efficiency, reduce labor intensity. It is


widely used in transporting limestone, granite, marble and minerals.


Performance Features:


1. Large capacity, long distance transport, transport smoothly;


2. Simple structure, convenient maintenance, lower energy consumption, high standardization degree of




Technical Parameters:


Belt width (mm) Length (m) / Power (kW) Capacity (t/h)
500 ≤12/3 12-20/3-5.5 20-30/5.5-7.5 40-80
650 ≤12/4 12-20/4-5.5 20-30/5.5-11 80-120
800 ≤10/4 10-15/4-5.5 15-30/5.5-15 120-200
1000 ≤10/5.5 10-20/5.5-11 20-40/11-22 200-320
1200 ≤10/7.5 10-20/7.5-15 20-40/15-30 290-480
1400 ≤10/11 10-20/11-22 20-40/22-45 400-680


  • 0

Belt Drying Equipment

Category : Uncategorized

Belt Drying Equipment

Food Drying Dehydrator includes Belt drying equipment, Tunnel drying equipment, Box drying equipment, Which is suitalbe for drying different kinds of fruit and vegetable in strip, slice, granule, etc.


Bet dryer is a kind of common continuous dehydrated equipment. It is widely used in food dehydration plant. It is specially for drying sliced or cut vegetable and fruit. The water content reaches to 10% or less after drying processing. The quality of raw material is not damaged. The belt drying is also used in pharmaceutical, chemical, electric industry and so on. Working temperature is adjustable for drying more raw material.


The raw material to be treated should distribute on the conveyor belt through suitable mechanism such as star distributor, swing belt, crusher or granulator. The conveyor passes through the channel consisting of one or several heating unit. Each heating unit. Each heating unit is equipped with air heat and circle system. Each channel has one or several damp discharge systems. When the conveyer passes through it, hot air will pass through the raw material from up to low or from low to up. In this way the raw material can be dried evenly.


The belt drier is ordinary continuous drying equipment. It is widely used for chemical industry, foodstuff industry, pharmaceutical industry, construction materials industry, electronics industry and so on. Especially it is suitable for drying raw materials that are good in berathability and have the shape of pieces or strip of granule. It is also possible the pasted raw material such as filter cake after shaped through granulator or extruder.


The materials are covered in belt evenly by feeding machine. The belt is made of stainless steel or nylon. It is driven by transmission system. The belt dryer is consisted of several units. Hot air circulate independently in each unit. Partial end gas is discharged by dehumidifying fan, waste gas is controlled by adjustable vale. The hot air pass through the belt which is covered material from up to down or down to up, this process achieves the exchanging of heat and moisture. The belt moves slowly, its speed can be adjusted according to the material temperature. It is ideal drying dehydrating equipment for vegetableand fruit.


Dehydrated vegetable, granule feed, moosodium glutamate, check extraction, organic pigment, synthetic rubber, propylene fiber, medicine material, small wooden products, plastic products, aging or solidifying for electronic elements.

  • 0

Durable Powder Ceramic Wet Ball Mill Machine , Industrial Ball Mills

Category : Uncategorized

Durable Powder Ceramic Wet Ball Mill Machine , Industrial Ball Mills


Introduction of Ceramic Ball Mill


Ceramic Ball Mill is mainly used for mixing, milling of the materials. It works with less energy but produces

high fineness product. It has two types, wet mills and dry mills. The machine could use different lining boar

according to product requirement to satisfy different customers’ requirement. The milling fineness depends

on the milling time. The motor is started by the coupling which can reduce voltage and lower the starting





Ceramic ball mill is widely used in powder-making production line including cement, silicate, new-type building material, refractory material, fertilizer, ore dressing of ferrous metal and non-ferrous metal, glass ceramics, etc. And it can grind various ores and other materials with no matter dry grinding or wet grinding.

This machine adopts the intermittent operation mode, used for grinding feldspar, quartz, clay, mineral raw materials and so on.


Structure of Ceramic Ball Mill


The structure is divided into integral type and freestanding type. Advantages of the machine are lower

investment, energy saving, structure novelty, easy and safe to operate, stable and reliable performance,



It is suitable for mixing and milling of general and special materials. Users can choose the proper model,

lining board and media as per the factors, such as: materials specific gravity and hardness.


Technical Data:


Model Effective volume(m³) Rotary speed(r/min) Once feeding quantity(t) Power(kw) Weight /without liner(t)
φ600×840 0.23 55 0.1 1.5 1.35
φ800×940 0.47 40 0.2 2.2 1.42
φ950×1020 0.72 34 0.3 3 1.5
φ1200×1400 1.58 34 0.5 4 2.5
φ1450×1760 2.91 26.5 1 11 3.5
φ1800×2100 5.3 23 1.5 15 4.5
φ2000×2300 7.2 16 2 22 5.9
φ2240×2600 10 18.7 3 30 7.4
φ2450×2800 13 16 4 37 9.5
φ2700×2900 16.6 16 5 37 10.5
φ2800×3100 19 15 6 45 12.4
φ2850×4000 25.5 14 8 55 16
φ3000×4650 32.5 16 14 90 20.8
φ3200×4650 37.5 16 18 90 23
φ3400×4650 43 12.5 23 90 25
φ3400×6300 57 12.5 30 110 30
φ3600×6300 64 11.8 36 110 32
φ3600×6500 66 11.8 38 110 32
φ3600×6700 68 11.8 40 132 35
φ3600×7170 68 11.8 40 110 35
φ4000×7860 99 10 60 185 48
φ4100×11200 147 10 100 315 73